B780 - Banking / Specifications

ModelsReceipt StationSlip Station


Print MethodDirect Thermal, 203 DPI9-Pin Impact
Character Cell Size13 X 24, 10 X 247 X 7, 12 X 7, 5 X 9
CPI15,6,20.313.9 & 16.8
Print Columns44 & 5642 & 51
Print Line Width2.8 in. (72 mm)3.02 in. (76.8 mm)
Character SetsPage 437, 737, 850, 852, 858 (with Eurosymbol), 860, 862, 863, 865, 866, 1251, 1252, and 1255. Contact your CognitiveTPG representative for expanded character sets 
Printing SpeedMonochrome 70.4 LPS (250 mm/sec) Two-color 27 LPS (100 mm/sec)4.8 LPS (16 mm/sec)

Bar Codes

UPC-A, UPC-E, Code 39, Code 93, Code 128, Code 128 extended, JAN8 and JAN13 (EAN), Interleaved 2 of 5, Codabar, EAN128, RSS, QR, PDF 417 (receipt station only) 


User Memory2MB: shared for graphics, logos, user-defined characters and user data storage 


Board Architecture supports: Dual 9-Pin RS-232/USB, 25-pin RS-232, Ethernet, USB, and Powered USB 


(W X D X H)6.5 in. X 11.4 in. X 6.6 in. (165.10 mm X 289.56 mm X 167.64 mm) 
WeightApproximately 8 lbs., depending on options 

Auto Cutter

Partial Cut 

Data Buffer



EMC emissions: EN55022:1998 Class B ITE emission requirements (EU)
FCC 47 CFR Part 15, Class B emissions requirements (USA)
VCCI Class B ITE emissions requirements (Japan)
AS/NZS 3548:2002/CISPR22 Class B ITE emission requirements (Australia)
EMC Immunity: EN55024:1998/A1:2001 Information technology equipment (EU)


Thermal Print Mechanism216 KM paper (64 M lines) monochrome
216 KM (57 M lines) two-color
Impact Print Mechanism15 M lines 
Impact Printhead200 M characters 
MICR reader200,000 Reads 
Auto Knife Cutter2 M cuts 
Warranty15 months15 months

Printer Drivers

OLE POS for Windows compatible and Windows/Windows NT and Windows 2000, Java POS, USB, and Powered USB 

MICR Reader

Character sets/fontsE-13B and CMC-7, auto discriminate (Integrated in slip station) 
Check Read Rate99% minimum 
Parsing FormatsE-13B only. Programmable to any format 

Emulations Available

Application compatible escape commands, TPG A756/A758, NCR5021 and DH 


MICR Reader, Expanded flash memory 

Thermal Paper Requirements

Paper TypeDirect Thermal, POS Grade(s), special paper for color printing 
Paper Roll (W X Dia.)3.15 in. X 3.27 in. (80 mm X 83 mm) 

Impact Slip Forms

Size2.75 in. X 5.00 in. (69.85 mm x 127.00 mm) minimum front & side 
Max. Form Length11.00 in. (279.4 mm) 
Number of Plies1 - 4 ply multipart 
Paper Thickness0.014 in. maximum (0.35 mm) 


24 VDC